You are here

hardware used in ss7

15 posts / 0 new
Last post
metal4591
hardware used in ss7

hi, what are the ss7 hardwares  available and which is the most used one???

Edited by: admin on 05/16/2010 - 04:32
alpork
Re: hardware used in ss7

Hi

I work with equipment Siemens His700.

Alpork

Robert
Re: hardware used in ss7

Hi alpork.
You mentioned that you have worked on His700. I have maintained SSNC, which is the same like His700, in this configuration His700 interwork with EWSD, His700+EWSD=POWERNODE.
My question is how to set up traffic measurement on His700?
The MP with Load model=STAT must be physically installed, if there my by virtual instance. I have got SSNC only Bas_Rack configuration.
Robert

alpork
Re: hardware used in ss7

Hi Robert

There is physically install special processor MP for statistic measurement in His700.
I should make configuration in His700.
I have to create SSNC measurement Log on His700.
It depends of type statistic I create for example MTP scheduling when I decide about measurement type (e.g Signalling point meas) and Measurement time period (e.g 5 minutes). If it work normally, I'll decide which signalling point I want to measure. For this action I can use workbench - manual action by my finger or special application dedicated for this action (click on mouse), the name is SS7 Management.
For visualization measure I use SPOTS. The SPOTS is special application when I can see by graph measure's result.

I hope that my answer is clear.
Alpork.

Robert
Re: hardware used in ss7

Hi alpork
Yes it is a clear answer, thanks a lot. It was not clear to me that I need physically installed processor, now it is.
I have got NetManager too, but I have not SS7 Management module. I have read some presentation about SPOTS, finally it was no decision about purchasing SPOTS in my company.
Robert

sachinparnami
Re: hardware used in ss7

Hi Guys,

Do you have any Idea about SANGOMA A102 T1/E1 card?

alpork
Re: hardware used in ss7

Hello

In His700 we use card MPUD for statistic measurement.

Alpork.

Robert
Re: hardware used in ss7

Hi
I looking for  someone who have had experience with ULTICOM Signalware or OMNI.
If someone have got experience or documentation, I will be great full to contact with me.

Robert

ceasarngoc
Re: hardware used in ss7

Hi all

How about price of Siemens His700. Where can buy?

Normal, i see HP SS7 Card, with OpenCall Lib for HP Server. Many telecom product use this card.

B/R

This my signature!

Robert
Re: hardware used in ss7

Hi
his700 I think about 1000000 Euro. Maybe  above?

Robert

ceasarngoc
Re: hardware used in ss7

Hi
I think you can use products of Dialogic.

http://www.dialogic.com/products/signalingip_ss7components/signaling_ser...

You can check price of Dialogic in http://www.nextag.com/

This my signature!

peopletech
Re: hardware used in ss7

sachinparnami wrote:
Hi Guys,

Do you have any Idea about SANGOMA A102 T1/E1 card?

Sangoma has MTP2 API , it is easier to write SS7 applications on sangoma T1/E1 Boards. Many applications can work with sangoma Hardware like SS7/SIP media Gateways ,USSD Gateways etc.

Thanks
Imthiyaz
http://www.peopletech.co.in

zero
Re: hardware used in ss7

I have experience using ADAX and mBalance SS7 HW.

http://www.adax.com/

I like the stack size its very small and fast (efficient).

tshn
Re: hardware used in ss7

Hi ,
  You can use SS7 dialogic cards, its very pwerful, how ever dialogic have many types of these cards you can check it from their site and you can choose what is suitable for you, its very good hardware.

Regards
Thaer Nofal

YOGESHHTIWARI
Re: hardware used in ss7

hi..Alpork.

can you tell me a complete doc about SPOTS and COMMANDER WITH SIS